BACKUP MODE 3
AC input is absent and PV power is strong enough to not only support the
load and charge the battery.
If the PV power persists, the load can be powered continuously without consuming
power from battery.
3.4 Fault Mode
Inverter enters Fault Mode when there is a fault event. The fault icon will be shown
with a fault code. Please refer to fault code table in "Troubleshooting" section.
3.5 LCD Setting
(1) Display Menu
The LCD display content will be changed in turns by pressing
button. The
Select able information is switched as below order: PV input voltage, PV
input current, AC input voltage, battery voltage, output voltage, output
frequency, load percentage, load VA value, load watt value. LCD will return
to default LCD display after 1 minute, if users want to return to default LCD
display immediately, please press
button.
(2) Setting Menu
After pressing and holding button for more 2 seconds to enter setting mode,
Pres
button for 1 second to select setting programs, the press button
to select program option, then press
button to confirm the selection.
