25
INSTALLATION AND ASSEMBLY
25
iV-Office ventilation device | Installation instructions
TIP:
Do not apply the sealing tape until
immediately before installing the base plate.
This prevents the sealing tape from swelling
too much and makes installation easier.
►
From the exterior wall side, attach the 9-mm seal-
ing tape circumferentially flush with the guide on
the base plate.
Do not seal the fixing holes!
►
Insert the rawl plugs into the boreholes.
►
Screw the base plate into the rawl plugs using 4
screws and washers.
TIP:
When attaching the base plate to
exterior walls with insulation or when using the
Simplex wall installation system, use wallplugs
for insulation for fixing purposes. These are
not included in the scope of supply, they are
available as an option.
NOTICE: If the joint between the base
plate and the exterior wall is incorrectly
sealed
, the cover cannot be fitted.
• Seal only the upper joint between the base
plate and the exterior wall.
►
Seal the upper joint between the base plate and
the exterior wall with a permanently elastic exterior
sealant.
►
Place the cover onto the base plate from the top.
►
Slide the cover downwards as far as the stop.
The guides on the cover hook in behind the
base plate.
The Flex Office weather protection hood is
installed.
4 x
!
!
i
i
