39
OPERATION
39
MZ-Home | Operating instructions
4.17 Activate/deactivate humidity and temperature sensor
If no humidity and temperature sensor is connected to the Clust-Air module, the message
no
sensor
flashes permanently on the start screen. This message can be switched off in the
sensor
activation
menu. All sensors are activated at the factory.
Note that only the humidity and temperature sensor of the Clust-Air module can be activated or
deactivated in this menu. Other, external, sensors must be activated or deactivated in the
Inputs submenu (
►
Touch the navigation arrow
until the
sensor
activation
menu item is displayed.
►
Touch the navigation arrow
.
The
sensor activation
submenu is called up.
►
Use the navigation arrow
to select the zone
whose sensor is active (On).
(for example zone 2).
The marker arrow points to the zone.
►
Touch the navigation arrow
/
,
to deactivate the sensor (Off).
►
Touch the navigation arrow
to confirm the
selection and move to the next zone.
i
Requirements:
• You are in the settings main menu.
To reactivate a deactivated humidity and temperature sensor, switch the sensor of the
corresponding zone back to the
On
option.
You have activated/deactivated the humidity and
temperature sensor.
i
s e n s o r a c t i v a t i o n
> z o n e 2 < o f f >
s e t t i n g s
> s e n s o r a c t i v a t i o n
> s e n s o r a c t i v a t i o n
z o n e 1 < o f f >
s e n s o r a c t i v a t i o n
> z o n e 2 < o n >
