26
OPERATION
26
MZ-Home | Operating instructions
Step 4: Set fan speed
This option assigns the defined output levels 1 – 3 or the Pause function (off) to the time interval.
►
Confirm the selection with the
navigation arrow
.
The flashing stops.
►
Use the navigation arrow
to select the
ventila-
tion level
menu item.
►
Touch the navigation arrow
to confirm the
selection.
The
ventilation level indicator
flashes.
►
Use the navigation arrow
/
to select the output level.
Step 5: Transfer data
If you have programmed or changed the settings for a zone, you can apply them within a zone for
each day of the week.
Note here:
• It is only possible to transfer the settings of the complete day. It is not possible to transfer
individual intervals.
• The data transfer only takes place for the current zone. Each zone must be programmed
separately.
By touching the navigation arrow
you can exit the menu without saving the changes. You return
to the activated 7-day timer menu and can make further settings on the 7-day timer.
►
Touch the navigation arrow
repeatedly until a
new screen opens.
►
Use the navigation arrow
to confirm the
YES
option.
The screen displays ..ok.
The data was transferred.
Requirements:
• The 7-day timer for the selected zone is active.
i
Requirements:
• The 7-day timer for a ventilation zone and a day
of the week is programmed/has been changed.
i
7 - d a y t i m e r
M o
0 2 - 0 4 h
H R
>
L V :
7 - d a y t i m e r
M o
0 2 - 0 4 h
H R
>
L V :
Ventilation level 1:
Ventilation level 2:
Ventilation level 3:
Pause function: no bar
7 - d a y t i m e r
a p p l y d a t a t o
e v e r y d a y ?
> y e s . . o k
