15
OPERATING AND DISPLAY ELEMENTS: OVERVIEW
15
MZ-Home | Operating instructions
3.3 Start screen
The start screen is the standard display when the MZ-Home controller is activated.
The start screen displays the inVENTer logo, the current date and time. Depending on the situa-
tion, current deviations are displayed on the start screen (e.g. no humidity sensor connected to a
zone).
Figure 6: MZ-Home controller start screen
The start screen switches itself off after 20 seconds (factory setting) without any input.
The display and setting menus can be selected from the start screen:
i
Menu navigation
Touch the navigation arrows on the control panel to select the menu:
• Navigation arrow
: You reach the manual control.
Here, the 7-day timer settings can be overridden for 1 – 8 hours. When the 7-day timer is
deactivated, the output level and operating mode are set here.
• Navigation arrow
: You reach the following main menus:
– Zone display main menu (
4.2).
– Settings main menu (
4.3 ff.)
.
• Navigation arrow
: You switch through the main menus in reverse.
To return from submenus to the respective higher-level menu, use the navigation arrow
to
select the first line of the menu and touch the navigation arrow
.
By
briefly
touching the navigation arrows
and
simultaneously
, you can
return to the start screen
from any screen.
max.
4 sec
i
Home function
i n V E N Te r
M Z - H o m e
N o S e n s o r Z o n e 1
0 1 . 0 1 . 2 0 1 8 1 5 : 0 8
Manufacturer
Device name
Additional information
(event depending)
Time
Date
