SECTION 8—SERVICE PROCEDURES
Part No 1146024
59
Recumbent Handcycle Series
Adjusting/Replacing the Parking Brake
WARNING
Before using your handcycle, inspect the parking brake for proper operation.
NOTE: For this procedure, refer to FIGURE 8.10 on page 59.
Adjusting the Parking Brake
Cable
1. Loosen the hex nut and turn the adjuster barrel clockwise (tighten) or
counterclockwise (loosen) to adjust the cable. Retighten hex nut.
Brake Pads
1. Adjust the brake pad assembly so that when the parking brake is engaged the brake
pads rest solely on the rim of the wheel.
Replacing the Parking Brake
Brake Pads
1. Remove the mounting nuts and replace brake pads.
2. Secure with existing hardware and adjust.
Parking Brake
WARNING
Replacement of the parking brake MUST be performed by a qualified technician.
FIGURE 8.10
Adjusting/Replacing the Parking Brake
Rim of Wheel
Brake Pad
Mounting Nut
Stop Button
Hex Nut
Adjuster Barrel