SECTION 9—OPTIONS
Recumbent Handcycle Series
72
Part No 1146024
Removing/Installing the Front Wheel - XLT Gold, XLT
Pro and XLT with Speed Cassette Chain
NOTE: For this procedure, refer to FIGURE 9.17 on page 72.
Removing the Front Wheel
1. Open the quick-release lever securing the front wheel to the fork (Detail "A").
2. Loosen the knob on the opposite side of the quick-release lever.
3. Remove the wheel from the fork.
4. Remove the chain from the front wheel.
Installing the Front Wheel
NOTE: For ease of installation, secure handcycle frame approximately 6 inches from the ground or
seek assistance.
1. Loop the chain over the front wheel sprocket.
2. Position the front wheel sprocket into the fork slots.
3. Tighten the knob on the opposite side of the quick-release lever.
4. Secure the wheel to the fork with the quick-release lever.
FIGURE 9.17
Removing/Installing the Front Wheel - XLT Gold, XLT Pro and XLT with Speed
Cassette Chain
Chain
Sprocket
Front Wheel
Fork
DETAIL “A” - FRONT
WHEEL QUICK-RELEASE
LEVER
NOTE: Quick Release Lever is an
opposite side of wheel.
Quick-release
Lever