SECTION 5—ARMS
Crossfire
™
T6A Wheelchair
28
Part No 1134343
Adjusting Swingaway Padded Armrest Height
NOTE:
For
this
procedure,
refer
to
FIGURE 5.2.
1. Remove
the
swing
away
padded
armrest
from
the
arm
socket.
2. Remove
the
mounting
bolt,
two
washers
and
locknut
mounted
in
the
arm
socket
that
determine
the
swingaway
padded
armrest
height.
3. Reposition
mounting
bolt
and
one
washer
to
one
of
three
positions
in
the
arm
socket
depending
on
the
desired
height.
4. Retighten
the
mounting
bolt
and
washer
to
the
arm
socket
with
the
remaining
washer
and
locknut.
5. Reinstall
the
swingaway
padded
armrest
into
the
arm
socket.
6. Repeat
STEPS
1
‐
5
for
the
opposite
side,
if
necessary.
FIGURE 5.2
Adjusting Swingaway Padded Armrest Height
Swingaway Padded Armrest
Arm Socket
Mounting Bolt
Locknut
Washer
Three Mounting Positions
Washer
