SECTION 9—WHEELS
Crossfire
™
T6A Wheelchair
48
Part No 1134343
Handrim Replacement
NOTE:
For
this
procedure,
refer
to
FIGURE 9.5.
1. Remove
the
rear
wheel
from
the
wheelchair.
Refer
to
Removing/Installing
Rear
Wheels
on
page 45.
WARNING
Tire MUST be fully deflated before any disassembly procedures are performed.
Otherwise injury or damage may result.
2. Remove
all
air
from
the
tube
by
pressing
down
on
the
pin
in
the
center
of
the
valve
stem.
3. While
carefully
holding
the
tire,
tube
and
rim
strip
to
one
side,
hold
the
allen
screws
and
remove
the
locknuts
that
secure
the
handrim
to
the
rear
wheel.
4. Remove
the
existing
handrim.
5. Install
new
handrim
by
reversing
STEPS
2
‐
4.
WARNING
DO NOT inflate tire until it is completely assembled. Otherwise injury or damage
may result.
6. Inflate
tire
to
correct
psi
rating
on
the
sidewall
of
tire.
7. Reinstall
rear
wheel
to
the
wheelchair.
Refer
to
Removing/Installing
Rear
Wheels
on
page 45.
8. Repeat
STEPS
1
‐
7
for
opposite
rear
wheel
if
necessary.
FIGURE 9.5
Handrim Replacement
Allen Screw
Locknut
Handrim
