SECTION 12—BATTERIES
Part No.1106645
58
Nutron® Series
Battery Clamp Method
WARNING
The battery clamp of the POSITIVE (+) battery terminal/post MUST be mounted in
the position shown in FIGURE 12.7, otherwise the battery box top cannot be
installed properly.
NOTE:
For
this
procedure,
refer
to
FIGURE 12.7,
FIGURE 12.8
and
FIGURE 12.9
.
FIGURE 12.7
Connecting Battery Cables - Battery Clamp Method
1. Perform
one
(1)
of
the
following:
• If
the
battery
clamp
of
the
POSITIVE
(+)
battery
terminal/post
is
NOT
mounted
in
the
orientation
shown
in
FIGURE 12.7,
perform
the
following:
i. Loosen
the
hex
nut
that
secures
the
battery
clamp
to
the
POSITIVE
(+)
battery
terminal/post.
CAUTION
When tightening the clamps, always use a box wrench. Pliers will “round off” the
nuts. NEVER wiggle the battery terminal(s)/post(s) when tightening. The battery
may become damaged.
ii. Remove
the
battery
clamp
from
the
POSITIVE
(+)
battery
terminal/post.
iii. Reposition
the
battery
clamp
on
the
POSITIVE
(+)
battery
terminal/post
as
shown
in
FIGURE 12.7.
iv. Securely
tighten
the
hex
nut
that
secures
the
battery
clamp
to
the
positive
(+)
battery
terminal/post.
• If
the
battery
clamp
on
the
POSITIVE
(+)
battery
terminal/post
is
positioned
as
shown
in
FIGURE 12.7,
proceed
to
STEP
2.
POSITIVE (+) Terminal/Post
(Note position of clamp)
NEGATIVE (-)
Terminal/Post Clamp
Hex Nut
Correct Orientation of the POSITIVE (+) Terminal/Post Clamp
Group 22NF Battery
