SECTION 6—FRONT RIGGINGS
Nutron® Series
35
Part No.1106645
Adjusting Calfpads
1. Turn
calfpad
towards
the
outside
of
the
wheelchair.
2. Slide
calfpad
up
or
down
until
desired
position
is
obtained.
NOTE:
If
one
(1)
of
the
top
two
(2)
calfpad
adjustment
positions
is
being
used,
the
legrest
will
need
to
be
raised
to
avoid
interference
with
the
front
stabilizers
while
going
over
obstacles
or
going
up
and
down
ramps.
Refer
to
Raising/Lowering
Elevating
Legrests
on
page 34.
3. Turn
the
calfpad
toward
the
inside
of
the
wheelchair.
FIGURE 6.6
Raising/Lowering Elevating Legrests and/or Adjusting Calfpads
Adjusting/Replacing Telescoping Front Rigging Support
NOTE:
For
this
procedure,
refer
to
FIGURE 6.7.
NOTE:
When
adjusting
the
telescoping
front
rigging
support
depth,
ensure
the
footplate
does
not
interfere
with
the
caster
wheel
rotation.
1. Lift
up
on
the
crossbraces
until
they
release
from
the
H
‐
blocks
on
the
wheelchair
frame.
2. Remove
the
long
socket
bolt
and
locknut
that
secure
the
front
H
‐
block
and
spacer
to
the
wheelchair
frame
and
telescoping
front
rigging
support.
3. Remove
the
front,
and
rear
short
socket
bolts
and
the
two
(2)
locknuts
that
secure
telescoping
front
rigging
support
to
wheelchair.
Release Lever
Top Two (2) Calfpad
Adjustment Positions
Calfpad Rotated for Height
Adjustment
Calfpad
