SECTION 7—ARMS
Part No.1106645
38
Nutron® Series
Using Swing-Back Arms
WARNING
Make sure the armrest release lever is in the locked position before using the wheel-
chair.
NOTE:
For
this
procedure,
refer
to
FIGURE 7.2.
1. Unlock
the
swing
‐
back
arms
by
rotating
the
armrest
release
lever
toward
the
outside
of
the
wheelchair.
2. Pull
the
front
of
the
swing
‐
back
arm
straight
up/out
of
the
arm
socket
and
toward
the
rear
of
the
wheelchair.
3. To
use
the
swing
‐
back
arm,
push
the
swing
‐
back
arm
toward
the
front
of
the
wheelchair
and
then
downward
into
the
arm
socket.
NOTE:
Armrest
release
lever
MUST
be
in
the
unlocked
position
when
placing
armrest
into
the
arm
sockets.
4. Lock
the
swing
‐
back
arms
by
rotating
the
armrest
release
lever
toward
the
inside
of
the
wheelchair.
FIGURE 7.2
Using Swing-Back Arms
Replacing Desk/Full Length Armrest Pad and/or
Clothing Guards (Fixed Height Arms Only)
NOTE:
For
this
procedure,
refer
to
FIGURE 7.3.
Armrest Pad
1. Remove
the
two
(2)
mounting
screws
that
secure
the
armrest
pad
to
the
armrest
assembly.
2. Replace
armrest
pad
and
securely
tighten
with
the
existing
mounting
screws.
3. Repeat
STEPS
1
and
2
for
the
other
armrest.
Clothing Guard
1. Remove
the
four
(4)
mounting
screws
that
secure
the
existing
clothing
guard
to
the
armrest
assembly.
2. Install
new
clothing
guard
and
securely
tighten
with
the
existing
mounting
screws.
3. Repeat
STEPS
1
and
2
for
the
other
clothing
guard.
Swing Back Arm
(Front)
Armrest
Release
Lever
Arm
Socket
Wheelchair
(Rear)
