SECTION 5—WHEELCHAIR OPERATION
Part No.1106645
30
Nutron® Series
The
Information
Gauge
display
also
serves
as
a
system
diagnostic
device
when
a
fault
is
detected
by
the
control
module.
A
specific
number
of
flashes
of
the
LEDs
indicates
the
type
of
fault
detected.
Refer
to
the
following
table
of
the
diagnostic
indications
of
the
wheelchair
status.
DISPLAY
DESCRIPTION
DEFINITION
COMMENTS
All three (3) LEDs are off.
Power is Off.
All three (3) LEDs are on.
Power is On.
Fewer than three (3)
LEDs on implies reduced
battery charge.
RED LED is flashing.
Battery charge is low.
The batteries should be
charged as soon as possi-
ble.
Left to Right “chase” alter-
nating with steady display.
Joystick is in program-
ming, inhibit and/or charg-
ing mode.
The steady LEDs indicate
the current state of the
battery charge.
GREEN LED is flashing.
Joystick is in Speed Limit
mode.
The current state of bat-
tery charge will be dis-
played at the same time.
All LEDs are flashing slowly. Joystick has detected
Out-of-Neu-
tral-at-Power-Up mode.
Release the joystick back
to Neutral.
All LEDs are flashing
quickly.
Joystick has detected a
fault.
Joystick uses Flash codes
to indicate faults.
INVACARE
INVACARE
INVACARE
INVACARE
INVACARE
INVACARE
INVACARE
