SECTION 12—BATTERIES
Nutron® Series
55
Part No.1106645
Connecting Battery Cables
WARNING
The use of rubber gloves and chemical goggles or face shields is recommended
when working with batteries.
NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery
terminal(s)/post(s) at the same time. An electrical short may occur and serious per-
sonal injury or damage may occur.
Perform
one
(1)
of
the
following
methods
for
connecting
the
battery
cable(s):
• Dual
U1
Batteries
‐
Use
direct
mount
method.
Refer
to
FIGURE 12.5
and
FIGURE 12.6.
• Dual
Group
22NF
Batteries
with
Mounting
Holes
in
the
Terminal(s)/Post(s)
‐
Use
direct
mount
method.
Refer
to
FIGURE 12.5
and
FIGURE 12.6.
• Dual
Group
22NF
Batteries
without
Mounting
Holes
in
the
Terminal(s)/Post(s)
‐
Use
battery
clamp
method.
Refer
to
FIGURE 12.7,
FIGURE 12.8
and
FIGURE 12.9.
Direct Mount Method
NOTE:
For
this
procedure,
refer
to
FIGURE 12.5
and
FIGURE 12.6.
1. Install
battery
terminal
cap(s)
onto
battery
cable(s):
A. Dual
U1
Batteries
‐
i. ORANGE
battery
terminal
cap
onto
RED
battery
cable.
ii. GREY
battery
terminal
cap
onto
BLACK
battery
cable.
B. Dual
Group
22NF
Batteries
‐
i. RED
battery
terminal
cap
onto
RED
battery
cable.
ii. BLACK
battery
terminal
cap
onto
BLACK
battery
cable.
FIGURE 12.5
Installing Battery Terminal Cap
Battery Cable
Battery Terminal Cap
NOTE:
Only
one
battery
cable
and
terminal
cap
shown
for
clarity.
Both
caps
install
in
the
same
manner.
