6 WHEELCHAIR OPERATION
43
6.6
Installing/Removing Front Riggings
MyOn and MyOn Active
Installing
1.
Position the front rigging assembly (A) to the side of the wheelchair frame (B).
2.
Insert footrest mounting pin (C) into mounting tube (D).
3.
Rotate the front rigging assembly towards the inside of the wheelchair until it locks into place.
4.
Repeat this procedure for the other front rigging assembly.
FIGURE
11
Installing/Removing Front Riggings - MyOn and MyOn Active
For maintenance and/or adjustment procedures, refer to Troubleshooting and Maintenance on page 53.
The footplate will be on the inside of the wheelchair when locked in place.
C
D
B
A
A
