5 SAFETY INSPECTION
33
Inspect/Adjust Weekly
❑
Wheelchair rolls straight (no excessive drag or pull to one side).
❑
Quick-release axles lock properly.
❑
Inspect for broken spokes.
❑
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑
Inspect tires/casters for flat spots and wear.
❑
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
❑
Ensure casters are free of debris.
Inspect/Adjust Monthly
❑
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
❑
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑
Wheel bearings are clean and free of moisture.
❑
Wheel locks do not interfere with tires when rolling.
❑
Wheel lock pivot point are free of wear and looseness.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Ensure all hardware is tight.
❑
Ensure hand grips are not loose.
❑
Ensure casters are free of debris.
❑
For 80° and 90° front riggings, check the mounting pin for excessive wear or damage. Replace mounting pin if worn or damaged.
❑
Inspect front rigging mounting pin and hardware. Specifically, inspect the mounting screw that secures the mounting pin to the front rigging.
Tighten mounting screw if loose.
Inspect/Adjust Periodically
❑
Wheelchair rolls straight (no excessive drag or pull to one side).
❑
Arms are secure but easy to release and adjustment levers engage properly.
