5 SAFETY INSPECTION
34
❑
Adjustable height arms operate and lock securely.
❑
Armrest pad sits flush against arm tube.
❑
All fasteners on clothing guards are secure.
❑
Seat and/or back upholstery have no rips.
❑
Inspect adjustable angle back attaching hardware is securely tightened.
❑
No excessive side movement or binding when rear wheels are lifted and spun.
❑
Inspect handrims for signs of rough edges or peeling finish.
❑
Inspect tires/casters for flat spots and wear.
❑
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
❑
Wheel lock pivot point are free of wear and looseness.
❑
Clean upholstery and armrests with mild soap and water.
❑
Sealed bearings and axle nut tension are correct.
❑
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑
Wheel bearings are clean and free of moisture.
❑
Wheel locks are easy to engage.
❑
Clean quick-release axles with a Teflon lubricant.
❑
Ensure axles are free from dirt, lint, etc.
❑
Ensure roller bearings are free from dirt, lint, etc.
❑
Adjust wheel locks as tires wear.
❑
Clean and wax all parts.
❑
Ensure casters are free of debris.
❑
Clean upholstery and armrests with mild soap and water.
❑
Check that all labels are present and legible. Replace if necessary.
