SECTION 12—ACCESSORIES
Part No. 1145807
47
Lynx™L-3X
Installing/Removing the Rear Mounted Basket
WARNING
The rear mounted basket is rated for a maximum capacity of ten lbs.
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely.
The installation of the basket and basket bracket onto the back of the scooter seat
increases the length of the scooter. When turning the scooter or swiveling the
scooter seat, it is important to take note of this increased length - otherwise, injury
and/or damage to surrounding property may occur.
NOTE:
For
this
procedure,
refer
to
FIGURE 12.5.
Installing
1. Loosen
but
DO
NOT
remove
the
mounting
knob.
2. Install
the
basket
bracket
into
the
accessory
tube.
3. Thread
the
mounting
knob
into
the
welded
nut
on
the
accessory
tube.
Securely
tighten.
4. Align
the
mounting
clips
on
the
bracket
with
the
slots
on
the
basket
and
slide
the
basket
down
securely
into
position.
Removing
1. Remove
the
basket
from
the
bracket.
2. Loosen
the
mounting
knob.
3. Remove
the
basket
bracket
from
the
accessory
tube.
4. Tighten
the
mounting
knob.
FIGURE 12.5
Installing/Removing the Rear Mounted Basket
Rear Basket
Slots
Basket Bracket
Mounting Clips
Accessory Tubes
Mounting
Knob
