Invacare Lynx L-3X Owner'S Operator And Maintenance Manual Download Page 26

Page: 26 / 48

SECTION 6—OPERATION OF THE POWERED SCOOTER

Lynx™L-3X

Part No. 1145807

Engaging/Disengaging the Brake Release Lever

WARNING

Ensure that the brake-release lever is in the engaged position before driving. There

should be an audible "click" when stopping and starting the scooter.

NOTE:

For

the

following

procedure,

refer

FIGURE 6.2.

The

brake

release

lever

manually

engages

and

disengages

the

brake.

The

brake

release

lever

located

under

the

seat

the

right

side.

The

brake

must

engaged

normal

driving

conditions.

Activation

the

throttle

control

lever

automatically

releases

the

brake

that

the

powered

scooter

can

drive.

Releasing

the

throttle

control

lever

automatically

engages

the

brake

prevent

the

powered

scooter

from

rolling

its

own.

When

the

brake

release

lever

disengaged

and

the

key

removed,

the

powered

scooter

can

pushed.

The

powered

scooter

cannot

driven

with

the

brake

the

disengaged

position.

1. To

Engage

the

Brake

Release

Lever

(Drive)

‐

Push

the

brake

release

lever

down.

2. To

Disengage

the

Brake

Release

Lever

(Push)

‐

Pull

the

brake

release

lever

up.

FIGURE 6.2

Engaging/Disengaging the Brake Release Lever

Brake Release

Lever

Push Down to

Engage
(Drive)

Pull Up to

Disengage

(Push)

Summary of Contents for Lynx L-3X

















































Search results

Summary of Contents for Lynx L-3X

Reviews:

Related manuals for Lynx L-3X

Brands by name

Popular brands

Invacare Lynx L-3X, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Lynx L-3X

Reviews:

Related manuals for Lynx L-3X

Brands by name

Popular brands