10 OPTIONS
Part No 1171891
89
Invacare® Top End® Recreation Handcycles
4.
If necessary, the wheel stop may be adjusted to one of three positions to
sit against the front wheel. To adjust the wheel stop, perform the following
steps:
A. Remove the mounting bolt and locknut securing the wheel
stop to the wheel tray bracket.
B.
Position the wheel stop in the desired mounting position.
C. Secure the wheel stop to the wheel tray bracket with the mounting
bolt and locknut.
Rear Wheel Bar Brackets
1.
Loosen the two screws securing the rear wheel bar bracket to the rear
wheel bar.
2.
Adjust the rear wheel bar bracket in/out until they sit against the rear
wheel.
3.
Secure the rear wheel bar bracket to the rear wheel bar with the two
screws.
4.
Repeat steps 1-3 for the opposite side if necessary.
Rear Wheel Bar
1.
Remove the two mounting bolts and locknuts securing the rear wheel bar
to the wheel tray.
2.
Position the rear wheel bar to one of three mounting positions on the
wheel tray.
3.
Secure the rear wheel bar to the wheel tray with the two mounting bolts
and locknuts.
To properly secure the handcycle, the rear wheel bar
brackets should be adjusted to sit against the rear
wheels.
To properly secure the handcycle, the rear wheel bar
should be adjusted so the rear wheels sit in the rear
wheel bar brackets.
Receiver
Bracket
Wheel Stop
Mounting Bolts
and Locknuts
Wheel Tray Bracket
Wheel Stop
Mounting Position
Large Mounting
Bolts and Locknuts
Rear Wheel Bar
Bracket
Screws
Rear
Wheel
Bar
Small Mounting Bolts
and Locknuts
Mounting
Bolts and
Locknuts
Wheel Tray
