3 SAFETY
Invacare® Top End® Recreation Handcycles
20
Part No 1171891
3.2
Proper Fit
The handcycle MUST be adjusted to fit the rider. Check the seat position, back angle, quick-release axles, footrest fore/aft position, hand crank height for
proper fit and smooth operation of your handcycle.
•
The rider MUST be able to see over the hand crank.
•
The rider MUST have a slightly bent elbow when the hand pedals are toward the front of the handcycle (farthest from the rider’s face).
•
The rider’s knees MUST not obstruct hand crank operation.
•
XLT Series - the rider MUST have a slight bend at the knee when feet are in the footrests. Feet should be flat against footrest hoop.
•
XLT Series requires a 18” turning radius. If leg touches tire during turn and the user cannot sense this, a leg guard attachment is recommended.
•
Excelerator Series - the rider MUST have a 90° bend at the knee when feet are in the footrests.
•
Excelerator Series - Footrests MUST be adjusted to allow a minimum of a 2-inch clearance between the bottom of the footrest and the ground.
