9 SERVICE PROCEDURES
Invacare® Top End® Recreation Handcycles
80
Part No 1171891
9.18 Replacing Seat
1.
Remove the locknuts, bolts, and coved spacers from both sliding
seat rail brackets.
2.
Remove sliding seat and seat rails from brackets.
3.
Remove the locknuts from the threaded studs from seat rails on
both sides of seat.
4.
Remove the seat from the seat rails.
5.
Reverse STEPS 3-4 to install a new seat onto the seat rails.
6.
Reverse STEPS 1-2 to install sliding seat and seat rails onto the seat
frame.
This procedure applies to Excelerator Series Handcycles only.
Seat Rail Locknuts
and Threaded Studs
(Both Sides)
Seat Rails
Seat Rail Bracket
Locknuts, Bolts, and
Coved Spacers
(Both Sides)
