10 OPTIONS
Invacare® Top End® Recreation Handcycles
84
Part No 1171891
10 Options
10.1 Installing Safety Lights
Batteries
1.
Remove the lens cover.
2.
Insert the AAA batteries with correct polarity (+ or -).
3.
Reinstall lens cover.
Mounting the Safety Light
1.
Remove the set screw from the clamp on the safety light.
2.
Install the safety light.
A. Rear safety light: Pull the back cushion off of the back frame.
Position the clamp onto the rear seat post. Install the set screw
into the clamp and tighten securely.
B.
Front safety light: Position the clamp onto the side frame. Install
the set screw into the clamp and tighten securely.
Operating the Safety Light
1.
Press GREY button to turn safety light on/off.
2.
Remove lens cover and slide switch back and forth for pulse or
constant mode.
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
WARNING
Operation of the handcycle is subject to all traffic rules and regulations (this may include the use of a safety lights and reflectors for
dusk/night riding).
Front Safety Light
Rear Safety Light
