5 USAGE
Part No 1143192
39
Invacare® Adjustable ASBA Seats
70° Taper
1.
Turn the footrest to the side (open footplate is perpendicular to
wheelchair).
2.
Insert footrest mounting pin into mounting tube.
3.
Push the footrest towards the inside of the wheelchair until it locks
into place.
4.
Repeat STEPS 1- 3 for the other footrest assembly.
5.
To remove the footrest, push the footrest release lever inward,
rotate footrest outward.
6.
Adjust footrest height, if desired. Refer to Footrest Height
Adjustment on page 51.
FIGURE
5
Installing/Removing Footrests - 70° Taper
5.5
Raising/Lowering Elevating Front Riggings
1.
Perform one of the following:
•
Raising - Pull back on the release lever and raise front rigging
to the desired height.
•
Lowering - Support front rigging with one hand away from the
release lever. Push release lever downward with other hand.
FIGURE
6
Raising/Lowering Elevating Front Riggings
The footplate will be on the inside of the
wheelchair when locked in place.
Footrest Mounting
Pin
Footrest
Release
Lever
Footplate
Mounting Tube
Release
Lever
