5 USAGE
Invacare® Adjustable ASBA Seats
40
Part No 1143192
5.6
Installing/Removing Elevating Legrests
Installing
1.
Turn legrest to side (open footplate is perpendicular to wheelchair).
2.
Install the legrest hinge plates onto the hinge pins on the wheelchair
frame.
3.
Rotate legrest toward the inside of the wheelchair until it locks in
place.
4.
Repeat STEPS 1-3
for the opposite legrest.
5.
After the user is seated in wheelchair, adjust footplate to correct
height by loosening nut and sliding the lower footrest assembly UP
or down until desired height is achieved.
Removing
1.
Push the legrest release handle toward the inside of the wheelchair
(facing the front of the wheelchair) and swing the legrest to the
outside of the wheelchair.
2.
Lift UP on the legrest and remove from the wheelchair.
3.
Repeat STEPS 1- 2
for opposite side of wheelchair.
FIGURE
7
Installing/Removing Elevating Legrests
The footplate will be on the inside of the
wheelchair when locked in place.
Legrest Release Handle
Bolt/Nut
Calfpad
Legrest
Hinge Plates
Hinge Pins
