3 SAFETY
Invacare® Adjustable ASBA Seats
18
Part No 1143192
Powered Seating
WARNING
This seating system has been custom designed and will be assembled to the wheelchair base before delivery to the user.
The information contained in this manual is for maintaining and adjusting the seating system. There are very few
adjustments that can safely be made by the user. If there is a procedure or adjustment that needs to be performed on the
seating system that is not in this manual, DO NOT perform that procedure. Have the seating system serviced by a qualified
technician.
Use caution when driving in a tilted position.
DO NOT operate the seating system while on an incline.
DO NOT operate the seating system while the wheelchair is moving.
NEVER operate the wheelchair while in any tilted position over 20° relative to the vertical position. If the drive lock-out
does not stop the wheelchair from operating in a tilted position over 20° relative to vertical, DO NOT operate the
wheelchair. DO NOT attempt to adjust the drive lock-out. Have the wheelchair serviced by a qualified technician.
Use only the controls listed in Using the Powered Seating Switch on page 32 to activate the tilt functions. DO NOT USE
any other actuator controls. Such devices may result in excess heating and cause damage to the actuator and associated
wiring and could cause a fire, death, physical injury or property damage. If such devices are used, Invacare shall not be liable
and the limited warranty is void.
Specific actuator controls are noted for each function or combination throughout this manual.
DO NOT operate tilt seat around children.
ALWAYS keep hands and feet out from underneath tilt seat - otherwise serious injury may result.
DO NOT tip the seating system/wheelchair without assistance.
DO NOT store items under seat.
Cables must be routed and secured properly to ensure that cables DO NOT become entangled and damaged during
normal operation of seating system.
Systems equipped with power legrests only - NEVER allow items to become trapped between the legrest assemblies.
Otherwise, damage to the power legrest could occur.
