Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
14
of 20
6
Test Genion
6.1
Diagnostics Screen
Upon plugging in the Diagnostics USB flash, and powering up the machine the following
screen appears.
Using single mode you perform a single test, Batch mode, all the tests and Burn
in Mode (which will not be used)
Using Config you choose which tests will be performed in the OOBT, Network will
present a form to fill with the network connections (not to be used in OOBT) and
reset to reset the sequence of the tests.
Shutdown shuts down the Genion.
Figure 4: Genion Diagnostics Screen
