Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
11
of 20
5
Prepare Terminal for Use
5.1
Remove Genion SD card
Turn the Genion so that the OOBT
technician has the back side in front
of him. Locate on the left side the SD
Card slot cover and remove the
Rubber cover. A Philips Screw will be
revealed.
Unscrew the Philips Screw with a
corresponding
Screwdriver
and
reveal the SD card slot along with the
SD card inside it.
Press gently on the back of the card
with your finger (press from the left
side towards the right side to release
the card from its socket). The SD
card is ready to have the Image
installed.
The needed equipment for the Image installation is a card reader that can accept SD
cards of normal size, either portable or on a laptop socket.
