Genion II [PN223, PN323, PN224, PN324] | v4.0
Date: 15.05.2018
Confidential | Final
Information Owner: K. Vrahatis
16
of 20
6.7
IRBeam test
Description
Tests the IR led and sensor.
Steps
1.
Touch the
[IRBeam Test]
button.
2. Place your hand under the camera, in order to block the beam.
3. Note down the result.
6.8
Touch Panel
Description
Tests the touch screen functionality.
Steps
1. Touch the
[Touch Panel]
button.
2.
The screen should look like this:
Touch the screen in the four designated circles.
On every corner you press the coordinates are shown and the circle
becomes green.
3.
Upon completion the test will exit.
4.
Note down the result.
6.9
Backlight Test
Description
Tests the monitor’s backlight.
Steps
1. Touch
the
[Backlight Test]
button. The screen turns white and
the backlight loops between four (4) levels of intensity.
2. Verify that there are four (4) clearly distinguishable intensity levels
and when prompted respond within 10 seconds (else, the test will
result in an ‘UNDETERMINED’ status).
3. Note down the result.
