345A
SAVE THESE INSTRUCTIONS
(345IO) SAND FILTER PUMP COMBO ENGLISH 7.5” X 10.3” PANTONE 295U 07/10/2019
English
Page 8
PRODUCT SPECIFICATIONS
SETUP INSTRUCTIONS
The sand filter removes suspended particles but does not sanitize your pool. Pool chemistry
is a specialized area and you should consult your local pool service specialist for details.
TOOLS REQUIRED: One (1) Phillips screwdriver
Pump location and mounting:
• The system must be installed on a solid level and vibration-free base.
• Provide a location protected from the weather, moisture, flooding and freezing
temperature.
• Provide adequate access, space and lighting for routine maintenance.
• Pump motor requires free circulation of air for cooling. Do not install the pump in a
damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
The appliance is intended only for household use.
Motor pre-filtering assembly setup:
1.
Remove the sand filter and its accessories from the packaging carefully and inspect for any
visible damage.
2.
In a counter-clockwise motion unscrew the leaf trap cover
(14)
from the pre-filter housing.
Take out the basket
(16)
and filter housing nut
(17) (see drawing 10)
.
3.
Connect the pre-filter housing to the motor water inlet. Note
: Align the connector in the
pre-filter housing with the water inlet on the motor
(see drawing 11)
.
11
10
35
17
16
14
Model:
ECO20220-2/ECO20230-2
ECO15220-2/ECO15230-2
Power:
220-240 Volt AC
220-240 Volt AC
Wattage:
520 W
300 W
Ideal Salt Level:
3000 ppm (parts per million)
3000 ppm
Maximum Sanitizer Output/hour:
11 grams/hour
7 grams/hour
E.C.O. Cell Output Current:
800mA
500mA
Maximum working pressure:
2 bar (30 psi)
2 bar (30 psi)
Effective filtering area:
0.13 m
2
(1.44 ft
2
)
0.1 m
2
(1.07 ft
2
)
Pump flow rate (at pump outlet):
10.0 m
3
/h (2650 GPH)
7.9 m
3
/h (2100 GPH)
Recommended filtering
media quantity:
No. 20 silica sand 55 Kg (
120
Lbs)
or glass sand 38 Kg (
85
Lbs).
No. 20 silica sand 35 Kg (77 Lbs)
or glass sand 25 Kg (55 Lbs).
Recommended filtering
media (Not included):
No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85 mm
(0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
Limited Warranty:
see “Limited Warranty”
