120-00012
GasD 8000 Series User Manual
12/14/2020
27
5) Remove the 4 screws from the corners of the rear panel as shown in Figure 7-6 below
and set aside. Use care not to lose screws or plastic washers! Pull the panel away from
the instrument case and set aside.
6) The sensor is held in a manifold that is attached to the left side of the instrument case
(looking from the rear) as shown below in Figure 7-7.
7) Reaching carefully into the instrument case, grasp the black sensor connector attached
to the top of the sensor as shown in Figure 7-8 below. Gently rock the connector from
side to side and pull the connector away from the sensor as shown in Figure 7-9 below.
FIGURE 7-6
FIGURE 7-7
SENSOR
MANIFOLD
FIGURE 7-9
FIGURE 7-8
