120-00012
GasD 8000 Series User Manual
12/14/2020
11
GRAPH DISPLAY
A graphical display of the continuous reading is
also accessible in ON MODE by pressing the
RIGHT ARROW
button. The current numeric
reading value is displayed in the lower right
corner.
Advance forward through the mode sequence by pressing the
ENTER
button as
needed. Advance backward through the mode sequence by pressing the
STOP
button
as needed. Pressing the
STOP
button successively will return the display to the MAIN
MENU where the SETUP and FILE menus can be accessed.
The Setup Menu shown on the right offers access to
user adjustable parameters and maintenance
functions. This menu is detailed below.
Flow rate
– cc / min
– Nominal setting =
200 cc / min
unless stated otherwise.
Do
not change this setting.
Sampling Mode
– Nominal setting =
CON
. This setting controls the SAMPLE
MODE procedure with 4 options as follows:
•
Continuous
- Sample is drawn continuously. This is the correct mode for
use in the GasD
8000 Series analyzer
•
HAL1
–
N/A for 8000 Series analyzers
•
HAL2
- N/A for 8000 Series analyzers
•
HAL3
- N/A for 8000 Series analyzers
Datetime
– Set the date and time according to the user’s time zone.
Alarm
– Allows enabling of Alarm functionality and setting of Alarm set point above
which Alarm indications will activate. (See section 3.7).
3.4 SETUP MENU
