Page 11
TO SELECT THE OPERATING MODE:
TO USE THE ENERGY SAVER MODE:
Select Operating Mode
：
To choose operating mode, press the Mode button.
Each time you press the button, a mode is selected
in a sequence that goes from Auto, Cool, Dry, Heat
and Fan. The indicator light beside the Mode button
will be illuminated.
To Operate Cool/Heat Mode:
Press the
MODE
button to select Cool/Heat mode,
temperature could be set between 62
ºF
and 86
ºF
in 1 ºF
increments
In cooling mode, the FAN-AUTO function can be
selected, automatically changing the fan speed as
the room temperature gets closer to set point.
To Operate Auto Mode:
When the "AUTO" function is selected, it will
automatically select the cool, heat or fan. The
temperature can be changed as desired. The
temperature range is 62°F to 86°F.
The air conditioner will control room temperature
automatically around the temperature set point.
In the "AUTO" mode, the fan speed is not
selectable. The fan will change speeds according to
the room temperature and the set point.
If "AUTO" mode is not comfortable, select another
mode.
To Operate Fan Only Mode:
Use this function only when cooling is not desired
such as for room air circulation or to exhaust stale
air. Open the outside vent for maximum circulation.
The outside vent should be closed for all other
modes (Cooling, Heating, Auto and Dry). Fan speed
is selectable (Auto, High, Med, and Low).
The Fan only function will display the actual room
temperature.
In other modes the set point is displayed.
In Fan only mode, the temperature is not adjustable.
To Operate Dry Mode:
In this mode, the air conditioner will operate in the
form of a dehumidifier. Since the conditioned space
is a closed or sealed area, some degree of cooling
will continue.
Energy Saver Mode:
This
function is available in COOL/DRY/AUTO (only
Auto Cool and Auto Fan available) mode. The fan
will continue to run for 3 minutes after the
compressor shuts off. The fan then cycles on for 2
minutes at 10 minute intervals. If the room
temperature goes above the set point, the
compressor turns on and begins to cool.
Press
the temperature UP/DOWN buttons to select
the desired set temperature. The temperature range
is 62°F to 86°F.
The
fan speed is selectable in the Energy Saver
mode.
