Page 19
IMPORTANT INFORMATION
3 minutes delay
The Cool circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents
overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
Select
℉
or
℃
The unit is shipped in degree F as the default indication.
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
To convert from one to the
other, press and hold the UP and DOWN temperature (Timer) buttons on control panel simultaneously for 3 seconds.
Fresh Air Vent Control
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air - Vent Closed (See Fig. A)
2. Draw fresh air into the room- Vent Open (see Fig. B)
3. Exchange air from the room and draws fresh air into the room - Vent and Exhaust Open (see Fig. C)
4.
To change vent operation (position) pull lever to desired opening.
Air Directional Louvers
The louvers will allow you to direct the air flow Up or
Down (on some models) and Left or Right throughout the
room as needed. Pivot horizontal louvers until the desired
Up/Down direction is obtained.
Move the Levers from side to side until the desired
Left/Right direction is obtained.
