Page 13
CHECK FILTER FEATURE:
DISPLAYS:
CHECK FILTER FEATURE:
This feature is a reminder to clean the Air Filter for more
efficient operation. The LED (light) will illuminate after 250
hours of operation. To reset after cleaning the filter, press
the Check Filter button and the light will turn off.
DISPLAY INDICATIONS:
Displays the following possibilities:
* °F or °C
* Timer setting
* Set temperature (all modes other than fan).
* Room temperature in the fan mode
* Error codes
Error codes:
1) AS
-
Room temperature sensor error. Unplug the
unit and plug it back in. If error repeats, call for
service.
2) LO
or
HI
– (Fan Only Mode) Room temperature
sensor error. Unplug the unit and plug it back in. If
error repeats, call for service.
3)
“
·
” (see picture to the left)
- Evaporator
temperature sensor error. Unplug the unit and plug
it back in. If error repeats, call for service.
4) HS
-
Electric heating sensor error. Unplug the unit
and plug it back in. If error repeats, call for service.
