S
SE
EC
CTTIIO
ON
N 2
2
"
Installation
2
2--1
12
2
6400 Vehicle Dock Installation Instructions
TTo
op
p M
Mo
ou
un
ntt B
Ba
atttte
erry
y C
Co
on
nn
ne
eccttiio
on
n
WARNING:
Because electrical energy from vehicle batteries can harm equipment and
people, it is very important to make sure that you make the correct cable to
battery connections.
1. Remove the bolts from the vehicle battery terminals.
2. Replace the bolts removed in step 1 with 3/8”
x
1-1/2” bolts
(
4
)
and nut
(
10
)
furnished in the installation kit. Tighten nut secure-
ly.
3. Slip a 3/8 inch washer
(
9
)
onto the extended end of each battery
terminal bolt.
4. Slide the positive (fuse link with red wire
(
8
)
) terminal ring from
the battery cable onto the positive (+) battery terminal bolt
(
4
)
.
5. Slip a second 3/8 inch washer
(
9
)
onto the battery terminal bolt
(
4
)
.
6. Thread a second 3/8 inch nut
(
10
)
onto the battery terminal bolt
(
4
)
.
7. Tighten the nut.
Repeat steps 3 through 6 for the negative wire (black or brown) from
the battery cable, connecting the wire to the negative (-) battery termi-
nal.
