S
SE
EC
CTTIIO
ON
N 2
2
"
Installation
2
2--1
10
0
6400 Vehicle Dock Installation Instructions
S
Siid
de
e M
Mo
ou
un
ntt B
Ba
atttte
erry
y C
Co
on
nn
ne
eccttiio
on
n
WARNING:
It is very important to make sure that you make the correct cable to battery
connections, because electrical energy from vehicle batteries can harm
equipment and people.
1. Remove both battery terminal bolts from the vehicle battery.
2. Screw a 3/8 inch nut (
10
) as far as it will go onto a 3/8”
x
1 1/2”
bolt
(
9
)
furnished in kit.
3. Slip a 3/8 inch washer
(
8
)
onto the battery terminal bolt.
4. Slide the positive (red wire/fuse link
(
7
)
) terminal ring from the
battery cable onto the positive (+) battery terminal bolt.
5. Slip a second 3/8 inch washer
(
8
)
onto the battery terminal bolt.
6. Slide the vehicle positive battery cable
(
3
)
onto the battery termi-
nal bolt.
7. Thread the bolt assembly (steps 2-6, above) into the positive bat-
tery terminal. Tighten the battery terminal bolt securely.
8. Tighten the nut
(
9
)
installed in step 2 to secure washers
(
8
)
and
cables firmly in place.
Repeat steps 2 through 8 for the negative wire (black or brown) from
the battery cable, hooking up the negative cables to the negative (-)
battery terminal.
