BENZING Express G2 DOC
Quick start Guide
BENZING Express G2 DOC
Quick start Guide
DK_BENZING-G2DOC_EN_10.doc • Valid as of 11
th
December 2008 • Part.No.: 812882
Page 1 / 2
GANTNER Pigeon Systems GmbH • www.benzing.cc
The lights on the top of the BENZING Express G2 DOC indicate the current system
status.
Status
Description
LED 1:
red
permanent
Charging of internal battery in progress
green
permanent
Charging of internal battery is complete
LED 2:
blue
permanent
The external power supply is active
blue
flashing
Supply by the internal battery
blue
fast flashing
The battery is nearly empty
Status information
The battery is designed to supply the fanciers system for approx. 5
hours (if one Antenna Controller and as many Antennas as desired are
connected) resp. 3 hours (if two Antenna Controllers and as many
Antennas as desired are connected).
To charge the battery, perform the following steps:
1.
Plug-in the power supply unit (C) to the BENZING Express G2
DOC (A) and connect the power supply unit to mains.
2.
Switch-on the BENZING Express G2 DOC with the On/Off button
(The button remains in On-position).
The light LED 1 on the top of the docking station will light red while
the battery is being charged. The completely loading time of the
battery will take approx. 12 hours. When the battery is fully loaded the
light LED1 colour will turn to green.
Note: The battery is also loaded in normal operation.
Before the BENZING Express G2 DOC is used the first time
the internal battery has to be completely charged once. This
takes about 15 hours. Do not interrupt the power supply
(the charging) during this time!
Battery
Set-up of the BENZING Express G2 DOC
1.
Connect the BENZING Express G2 DOC (A) to the BENZING Antenna Controller (E) with the connection cable (D).
2.
Connect the Loft Antenna EFA (F) to the BENZING Antenna Controller (E). Any of the four plugs can be used.
3.
a) If there is mains power available, plug-in the power supply unit (C) to the BENZING Express G2 DOC (A) and connect the power supply unit to
mains. The system will be supplied by mains power and only in case of a power surge or outage the BENZING Express G2 DOC (A) will take-over
the supply of the system.
b) If there is no mains power available, the BENZING Express G2 DOC (A) will supply the system.
4.
Plug-in the BENZING Express G2 (B) into the BENZING Express G2 DOC. The DB-9 plug must sit firmly.
5.
Switch-on the BENZING Express G2 DOC (A) with the On/Off button (H) (The button remains in ON-Position).
The BENZING Express G2 starts up and the lights on the front of the docking station are switched on and they show the system status (see "Status
information").
General
Clocking of pigeons with the BENZING Express G2 without any gaps, even in the event of a power surge or outage is guaranteed by the BENZING Express
G2 DOC. The BENZING Express G2 DOC is equipped with an internal battery and additionally with a USB interface for convenient transfer of statistical
data to the PC at home and for device updates.
For transmission of flight data from the BENZING Express G2 to a PC
and for loading data or new software from the PC to the BENZING
Express G2 and for printing with the BENZING Printer Manager (see
backside) perform the following steps:
1.
Switch-on the BENZING Express G2 DOC.
2.
Plug-in the USB-Connection cable (G) into the USB-Connection of
the BENZING Express G2 DOC (A).
3.
Plug-in the USB-Connection cable into a free PC USB port.
4.
Plug-in the BENZING Express G2 (B) into the docking station. The
DB-9 plug must sit firmly.
Note: If the BENZING Express G2 DOC is connected the first time to
the PC, the USB-driver must be installed. (See Software
description on backside).
PC Communication
!
Note: The BENZING Antenna Controller does not have to be
additionally connected with a power supply, if the Controller
is connected with the BENZING Express G2 DOC.
LED 1: green/red (Battery status)
Not used
LED 2: blue (Power supply)
A
BENZING Express G2 DOC
B
BENZING Express G2
C
Power Supply unit
D
Connection cable 5 m (16 feet)
E
BENZING Antenna Controller
F
Loft Antenna (EFA) with 3 m (10 feet) cable
G
USB-socket for PC-connection
H
On/Off button (at the back of the BENZING
Express G2 DOC)
