Intermec Janus 2010, User Manual, Page: 308 / 558

JANUS 2010 Hand-Held Computer User’s Manual
nugget
39
helconital
10-26
Using MkImage and PutImage (continued)
Problem Solution
Error, not enough
free conventional
memory to create
disk image
2010U.032
Free some conventional memory and then try to run MkImage again. For
help, see “Making More Memory Available on the Reader” in Chapter 3.
Error, not enough
free disk memory to
create output file
2010U.033
There is not enough memory on your disk to create the MkImage output
file. Remove one or more files and free some disk space.
Error, could not
open image file
2010U.034
Verify that the image file exists and you have the correct path and filename
in the PutImage command and then try again.
Error, image file
not found
2010U.035
Verify that the image file exists and you have the correct path and filename
in the PutImage command and then try again.
Error, invalid image
file, recreate using
the MkImage command.
2010U.036
The image was created by a method other than MkImage, or you entered
the wrong filename in the PutImage command. Create the image file with
MkImage, and then try running PutImage again.
Error, not enough
free conventional
memory to run this
program.
2010U.037
Free some conventional memory and try to run PutImage again. For help,
see “Making More Memory Available on the Reader” in Chapter 3.