Intermec Janus 2010, User Manual, Page: 137 / 558

NF
BC
Using PC Cards in the Reader
4-11
4
Inserting Cards Into the Type II Drive
A JANUS 2010 with a PCMCIA Back has two PC card drives. The PCMCIA
Back provides a Type II PC card drive that is located on the back of the reader
on the top edge near the scanner/wand connector. You can use a Type I or
Type II PC card in the Type II drive.
To insert a PC card
1. Make sure the reader is on. Press
q
to turn on the reader.
Note: The reader must be turned on when you insert a card into the Type II drive
or the reader may not recognize the card.
2. Hold the reader in one hand with the keypad pointed toward the floor.
With your other hand, push the PC card drive door away from the reader
until the door is released.
2010U.158
PCMCIA back
PC card drive door
3. Identify the two notches on the edges of the PC card. Look at the connector
end of the card. There is a single-walled notch on one side, and a double-
walled notch on the other side.
Double-walled
notch
Connector end
PC card
2010U.159
Single-walled
notch