Intermec ESim v4.20, Programmer'S Reference Manual, Page: 76 / 160

70 Intermec EasyCoder ESim v4.20—Programmer’s Reference Manual
Chapter 7—Commands
GG – Print Graphics
Description Th is command is used to print a graphic that has been previously
stored in memory.
Syntax
GGp
1
,p
2
,"name"
Parameters p
1
Horizontal start position (X) in dots.
p
2
Vertical start position (Y) in dots.
"name" This is the name used when the graphic was stored. The name may be from 1
to 8 characters. The printer is case sensitive, that is the use of upper and lower
case letters must match the original name.
Remarks A graphic can only be printed in same direction and size as when
it was saved. Th
ere are no means of magnifi cation or rotation of
an individual graphic. However, the entire print image including
all text, bar codes, graphics, lines, and boxes can be rotated 180°
using the
Z command.
Example
GG50,50,"LOGO"
↵
:Prints the graphic "LOGO"