Intermec ESim v4.20, Programmer'S Reference Manual, Page: 129 / 160

Intermec EasyCoder ESim v4.20—Programmer’s Reference Manual 123
Chapter 7—Commands
^C – Continue Printing
Description Th is high-priority command makes the printer continue print-
ing the remainder of a print job after having been temporarily
stopped using a
^A command.
Syntax
^C
↵
Remarks When the printer is in Pause mode, the control LED slowly
blinks green-yellow-green. Th
e reply at command US is by
default <XON> (can be changed using eR command). No reply
at UN command.
Another way to resume printing a batch is to press the Feed key.
Th is command can only be sent via the RS-232 or USB ports.
Example Th is example renders a box and orders the printer to print 4
copies. At command ^A, the printing is paused and continued
again at command ^C.
X0,0,10,20,40
↵
P4
↵
^A
↵
^C
↵