Intermec ESim v4.20, Programmer'S Reference Manual, Page: 124 / 160

118 Intermec EasyCoder ESim v4.20—Programmer’s Reference Manual
Chapter 7—Commands
Z – Print Direction
Description Th is command is used to select the print orientation.
Syntax
Zp
1
Parameters p
1
Print orientation:
T Start printing from the top of image buff er (default).
B Start printing from the bottom of image buff er.
Remarks Th is command aff ects the complete print image, including text,
bar codes, graphics, lines, and boxes, as well as the location of the
reference point (see
R command).
Note that printing a test label in the Test Mode, or by means of
a
U or UP command, will reset the print direction to default (=
ZT ).
ZT Command:
ZB Command:
Example
ZB
↵
:Starts printing from the bottom of the image buffer.
EASYC ODER C4
Feed Direction
EASYCODER C4
Feed Direction