Intermec ESim v4.20, Programmer'S Reference Manual, Page: 127 / 160

Intermec EasyCoder ESim v4.20—Programmer’s Reference Manual 121
Chapter 7—Commands
^A – Print Pause Mode
Description Th is high-priority command makes the printer temporarily stop
printing more labels as soon as the immediate label is completely
printed and fed out (batch-printing only).
Syntax
^A
↵
Remarks When the printer is in Pause mode, the control LED slowly
blinks green-orange-green.... Th
e reply at command US is by
default <NAK>92<XOFF> (can be changed using eR com-
mand). No reply at UN command.
To resume printing a batch, send the command ^C or press the
Feed key.
To cancel the remainder of the print job, use the ^B command.
Th is command can only be sent via the RS-232 or USB ports.
Example Th is example renders a box and orders the printer to print 4
copies. At command ^A, the printing is paused and continued
again at command ^C.
X0,0,10,20,40
↵
P4
↵
^A
↵
^C
↵