Intermec EasyCoder PX6i, User Manual

Page: 83 / 168

-
EasyCoder PX6i User’s Guide (Fingerprint version) 69
Chapter 7 — Setup Mode
Navigating in Setup Mode
While going through the setup procedure, you are guided by texts in the
printer’s display. You can navigate between setup menus, acknowledge
displayed values, select or type new values, etc. by using the keys on the
printer’s keyboard.
Note: An external keyboard cannot be used inside the Setup
Mode.
1 /. “Left”, “right”, “up”, and “down” refer to the overviews later in this chapter.
Move up one level 1 .
Move one menu to the left on the same level or scroll back in a
stack of options
1 .
Exit the Setup Mode. Can be used anywhere in Setup Mode.
Enter numeric values.
Acknowledge and move to next menu or perform testfeeds in
the Testfeed menu, or print test labels in the Test label menu.
Move down one level 1 .
Display error messages at test label printing failure.
Clear displayed values.
Specify negative values (leading position).
Move one menu to the right on the same level or scroll forward
in a stack of options
1
.