Intermec EasyCoder PX6i, User Manual

Page: 147 / 168

EasyCoder PX6i User’s Guide (Fingerprint version) 133
Appendix B — Media Specifi cations
Tickets with Black Mark
⇐
a
⇒
Media Width
Maximum: 170 mm (6.69 inches)
Minimum: 76 mm (3.00 inches)
⇐
b
⇒
Copy Length
Maximum:
8 dots/mm (203.2 dpi):
6,143 mm (241 inches)
11.81 dots/mm (300 dpi): 4,162 mm (163 inches)
provided there is a suffi cient amount of free SDRAM memory
Minimum: 20.0 mm (0.8 inches)
⇐
c
⇒
LSS Detection Position
Variable, see Chapter 12.
⇐
d
⇒
Black Mark Width
Maximum: Full media width
Recommended:
10.0 mm (0.39 inches)
Minimum: 5.0 mm (0.20 inches)
⇐
e
⇒
Black Mark Length
Maximum: 25.0 mm (0.98 inches)
Recommended: 3.2 mm (0.13 inches)
Minimum: 1.27 mm (0.05 inches)
⇐
f
⇒
Black Mark Y-Position
It is recommended that you place the black mark as close to the front
edge of the ticket as possible and use a negative Stop Adjust value to
control the media feed, so the tickets can be properly torn off. The black
mark can be placed either on the top or at the back of the media.
Black Mark Characteristics
Maximum refl ectance: 15%, 940 nm
Difference between mark and media: 55%
Media Type Setup
• Ticket (w mark)