Intermec EasyCoder PX6i, User Manual

Page: 163 / 168

EasyCoder PX6i User’s Guide (Fingerprint version) 149
Appendix D — Intermec Supplies
Direct Thermal Printing; 11.81 dots/mm (300 dpi)
Type/Speed Name Label Label Max Rec. Print Speed 1
Constant Factor Dir 1&3
2
Dir 2&4
3
Top Coated/ Thermal Top Board 4 94 40 225 150
Standard Thermal Top 81 40 225 200
Thermal IR 105 40 225 100
Non Top Coated/ Thermal Eco 74 40 225 225
Standard Thermal Eco Board
4
70 40 225 200
Top Coated/High Thermal Top High Speed 85 40 225 225
Thermal Transfer Printing; 11.81 dots/mm (300 dpi)
Type/Speed Name Ribbon Ribbon Label Max Rec. Print Speed 1
Constant Factor Offset Dir 1&3
2
Dir 2&4
3
GP02 TTR Uncoated 63 25 0 225 225
TTR Coated 64 25 0 225 225
TTR Premium 56 25 0 225 225
HP66 TTR Coated 84 25 0 225 225
TTR Premium 71 25 0 225 225
TTR Premium Board 4 99 25 0 225 225
TTR High Gloss White 86 25 0 225 225
TTR Polyethylene 71 25 0 225 225
TTR Gloss Polyethylene 82 25 0 225 225
HP05 TTR Coated 79 25 0 225 225
TTR Premium 72 25 0 225 225
TTR Premium Board 4 85 25 0 225 225
TTR High Gloss White 81 25 0 225 225
TTR Polyethylene 70 25 0 225 225
TTR Gloss Polyethylene 79 25 0 225 225
HR03 TTR High Gloss Polyester 81 25 0 175 225
1 /. Exceeding the recommended print speed may cause the printhead to wear out prema-
turely. If the ambient temperature is lower than +15°C (+59°F), decrease print speed by
50 mm/sec.
2 /. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3
/. Applies to ladder bar codes.
4
/. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”).