Intermec EasyCoder PX6i, User Manual

Page: 145 / 168

EasyCoder PX6i User’s Guide (Fingerprint version) 131
Appendix B — Media Specifi cations
Tickets with Gaps
⇐
a
⇒
Media Width
Maximum: 170 mm (6.69 inches)
Minimum: 76 mm (3.00 inches)
⇐
b
⇒
Copy Length
Maximum:
8 dots/mm (203.2 dpi):
6,143 mm (241 inches)
11.81 dots/mm (300 dpi): 4,162 mm (163 inches)
provided there is a suffi cient amount of free SDRAM memory
Minimum (without LTS): 8.0 mm (0.32 inches)
Minimum (with LTS): 12.0 mm (0.47 inches)
⇐
c
⇒
LSS Detection Position
Variable, see Chapter 12.
⇐
d
⇒
Detection Slit Length
The length of the detection slit (excluding corner radii) must be mini-
mum 2.5 mm (0.10 inches) on either side of the LSS detection position
(e).
⇐
e
⇒
Detection Slit Height
Maximum: 25.0 mm (0.98 inches)
Recommended: 1.6 mm (0.06 inches)
Minimum: 1.27 mm (0.05 inches)
Opacity
Max opacity difference: 48%
Media Type Setup
• Ticket (w gaps)
Note: Do not allow any perforation to break the edge of the
media as this may cause the media to split and jam the printer.