Intermec CV61, User Manual

Page: 65 / 120

Chapter 4 — Configure the Computer
CV61 Vehicle Mount Computer (Windows 7) User Guide 53
2 Choose Communications > 802.11 Radio > Wireless Security .
3 Select the profile you want to configure.
4 For 8021x , choose LEAP .
5 For Association , choose Open , WPA , WPA2 , or Network EAP .
Encryption automatically defaults to TKIP if you choose WPA ,
AES if you choose WPA2 , and WEP if you choose Open or
Network EAP.
6 For Prompt for Credentials , choose Enter credentials now .
7
Enter a User Name and User Password .
8 Save your settings.
Configure Static WEP Security With Wireless Security
Use the following procedure to configure static WEP security with
Wireless security. Intermec recommends that you use WPA2-PSK
instead of WEP if possible.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Make sure Wireless Security is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Wireless Security .
5 Select the profile you want to configure.
6 For 8021x choose None .
7 For Association , choose Open .
8 For Encryption , choose WEP .
9 Define a value for the keys you want to use. You can define up to
four keys (
Key 1 through Key 4 ).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5-byte value for
64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be
preceded by 0x and contain 5 or 13 hex pairs.