To add a privacy mask area:
1. From the menu toolbar, click
Configuration
>
Image
>
Privacy Mask
.
2. Select the
Enable Privacy Mask
check box.
3. Click
Draw Area
.
4. Click and drag the mouse in the live video window to draw the mask area.
5. Click
Stop Drawing
to finish drawing, or click
Clear All
to clear all of the areas set
without saving them.
6. Click
Save
to save changes.
Basic event
Motion detection alarms
A motion detection alarm refers to an alarm triggered when the camera detects motion.
The motion alarm is only triggered if it occurs during a programmed time schedule.
Select the level of sensitivity to motion as well as the target size so that only objects
that could be of interest trigger a motion recording. For example, the motion recording
is triggered by the movement of a person but not that of a cat.
Define the area on-screen where the motion is detected, the level of sensitivity to
motion, the schedule when the camera is sensitive to detecting motion, as well as
which methods are used to produce a motion detection alarm.
Dynamic analysis for motion can also be enabled. When there is motion, the motion
area is indicated by green rectangles.
30
TruVision 81 Series IP Camera Configuration Manual
